Showing posts with label Electric Motors. Show all posts
Showing posts with label Electric Motors. Show all posts

How to Troubleshoot Electric Motor Starters

If your electric motor starter is facing problems then its troubleshooting can be a problematic task. But ones you have thoroughly understood its basics then troubleshooting can be done without mush trouble. Follow these steps to troubleshoot an electric motor starter:
  1. The first step to perform is to wear safety glasses and switch off all the connections. Take all the precautions before starting the troubleshooting. Switch off the volt-ohm meter to volts and place the leads to the incoming power. The voltage should read 0.
  2. Check that all the screws are tight with the help of a screwdriver. Also heck the wires for any burnt or black discoloration. If so, then immediately replace the wires with a new one.

How an Electric Brake Motor Works

Theory:
Electric motor brakes can basically make an electric motor turn backwards. The motor brakes supply the electric motor with an external force, instead of an electric force to make the shaft in the motor run. This external force is usually applied by the wheels of the car that generate electricity.

Working:
There are two separate coils of wire in a motor that are located constructively around a permanent magnet which is connected to the central shaft. When electricity passes through these wires, a magnetic field is generated that makes the motor work. The central magnet alternates and results in a continuous feeling of rotation on the magnet. As per the alignment of the central magnet, the magnetic field turns on and off consecutively, thus making the magnet turn.

Troubleshooting Electric Motors

Solving an Electric Motor problem proactively on your own or troubleshooting an electric motor can save you a lot of money and time. If the problem if small it is better to solve it on your own, but if the problem turns out to be severe, then there are always repair shops available to repair them. Troubleshooting contains some steps that you should keep in mind:
  1. If your electric motor is giving you a problem, then the first step would be to test what the problem is. An ohmmeter or a test lamp can be used to do the testing. This way you will know whether your motor can be repaired or has to be replaced.
  2. Put on your safety glasses to start the process.